Licensed & Insured, in Toledo and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Toledo
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (567) 702-4617 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Toledo and surrounding areas · On-site visits included · Free estimate within 24h
Toledo Metal Roofing is a team of local certified professionals based in Toledo. We respond quickly in Toledo and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (567) 702-4617⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“Our old barn roof was leaking over the hay storage and we needed it fixed before winter. Toledo Metal Roofing replaced the corrugated panels on the whole barn and even worked around the silos without any hassle. The crew of four knocked it out in two days and cleaned up every last screw.”
Agricultural Metal Roofing
“We had them put a copper awning over our front entry and it looks incredible, the soldered seams are flawless. Only reason I'm not giving five stars is the schedule slipped by about a week, but the finished work was worth the wait.”
Copper & Specialty Metal Roofing
“Needed a metal roof on our new equipment shed out back and these guys delivered. Straightforward quote, no upselling, and the ribbed panels went up fast. Solid work for a fair price.”
Commercial & Agricultural Metal Roofing
“After two summers of patching our old shingles we finally went standing seam, and I wish we'd done it years ago. The team measured everything carefully, kept the site spotless, and the dark bronze finish looks sharp against the brick. Genuinely relieved we won't be chasing leaks anymore.”
Standing Seam Metal Roofing
“Had a leak near our chimney pipe that two other outfits couldn't figure out. Toledo Metal Roofing found the bad flashing, resealed it, and re-fastened some loose panels while they were up there. No more drips through the ceiling, very grateful.”
Metal Roof Leak Repair
“We went with the retrofit over our existing shingles to save money and mess, and it worked out great. About 1,800 square feet done in three days with a crew of five, and you'd never know there were shingles underneath. The house looks completely different.”
Metal Roof Over Shingles (Retrofit)
“They repaired the flashing around our brick chimney and resealed a skylight that had been weeping for months. Quick diagnosis, fair price, and they showed me photos of the before and after. Happy customer here.”
Chimney & Skylight Repair
“Our Tudor-style house needed something that matched the old-world look, and the metal shingle system they recommended was perfect. Installation took about a week and a half, and the crew was respectful of our landscaping the whole time. Surprised how much better it turned out than I expected.”
Metal Shingle RoofingReal photos of our work in Toledo · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener metal roof installation | Starting at $8/sq ft | Includes tear-off, underlayment, and ribbed panels; roof complexity and deck repairs move the price. |
| Standing seam metal roof installation | Starting at $12/sq ft | Concealed fasteners and long panels; pitch, valleys, and historic detailing raise the cost. |
| Metal shingle or stone-coated steel installation | Starting at $14/sq ft | Includes panel layout and trim; HOA or historic district design review can add planning time. |
| Metal roof over shingles (retrofit) | Starting at $9/sq ft | Skips tear-off where code allows; existing layer count and deck condition decide eligibility. |
| Complex or large-scale job | On estimate | Steep roofs, multiple dormers, and barns need an on-site look before a number is given. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard standing seam install | Starting at $10/sq ft | Includes tear-off, underlayment, panels, seaming, and standard trim on an accessible roof. |
| Mechanically seamed upgrade | Starting at $13/sq ft | Adds power-seamed ribs and heavier clips for exposed sites and high-wind zones. |
| Standing seam over shingles | Starting at $9/sq ft | Retrofit over one existing layer, subject to local code limits on layers and deck condition. |
| Complex roof or historic home | On estimate | Multiple valleys, dormers, turrets, or historic review require an on-site look before pricing. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard tear-off and metal panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and new panels. Steep pitch or extra layers raise the rate. |
| Standing seam replacement | Starting at $12/sq ft | Concealed-fastener panels with new underlayment and edge metal. Roof complexity and panel gauge move the price. |
| Metal shingle or stone-coated steel replacement | Starting at $11/sq ft | Architectural profiles over new underlayment. Historic district or HOA design review can add time and cost. |
| Complex or large-scale job | On estimate | Multiple roof levels, extensive decking rot, or historic homes need an on-site look before we quote. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer, exposed-fastener panel | Starting at $7/sq ft | Includes underlayment, new flashing, fasteners, and labor over one sound shingle layer. |
| Retrofit over two or more layers | Starting at $8.50/sq ft | Adds build-out and longer fasteners to clear the extra shingle thickness safely. |
| Standing seam retrofit over shingles | Starting at $11/sq ft | Concealed fasteners and eave build-out raise material and labor cost. |
| Steep pitch or complex roof (Old West End, Tudors) | On estimate | Steep pitches, multiple valleys, and tight city lots need an on-site look before pricing. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-issue repair visit | Starting at $450 | Covers resealing one penetration, replacing a few screws, or one flashing repair |
| Seam and fastener repair | Starting at $650 | Reseals multiple laps and replaces rusted gasketed screws across a roof section |
| Hail or wind panel replacement | Starting at $900 | Replaces one or more damaged panels; price rises with roof height and pitch |
| Chimney, skylight, or valley flashing | On estimate | Needs an on-site look because flashing scope varies with the detail and rot |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair | Starting at $450 | Covers diagnosis, water testing, and repair of a single fastener or small flashing gap. |
| Seam or flashing repair | Starting at $650 | Rebuilds a failed seam or flashing detail, includes materials and a second water test. |
| Panel replacement | Starting at $900 | Cuts out and splices a damaged panel section, matched to your existing profile and color. |
| Complex or large-scale leak | On estimate | Multi-point leaks or complex roof geometry need an on-site look before we quote. |
| Emergency tarping | Starting at $350 | Stops active water after a storm, credited toward the permanent repair if booked within 30 days. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic screw replacement and re-fastening | Starting at $750 | Covers a typical residential or outbuilding roof with isolated loose fasteners and new washers. |
| Oversized fastener reset | Starting at $950 | For wallowed or stripped holes where the original fastener no longer holds the panel securely. |
| Full-panel or edge re-fastening | Starting at $1,250 | Resets every fastener on a panel run or wind-lifted gable edge, eave to ridge. |
| Large agricultural or commercial roof | On estimate | Barns, grain bins, and long panel runs need an on-site look before a number is given. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel installation | Starting at $5.50/sq ft | Includes panels, gasketed screws, closures and basic trim; price rises with pitch and access difficulty |
| R-panel or 5V installation | Starting at $6.25/sq ft | Trapezoidal or 5V profile with ridge cap and eave trim; larger roofs lower the per-square-foot rate |
| Re-fastening and screw replacement | On estimate | Priced by panel count and roof access; we inspect for rust and panel fatigue first |
| Tear-off and disposal | On estimate | Depends on existing layers, deck condition and dumpster access at the site |
| Travel | Included | in Toledo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation (architectural profile) | Starting at $9/sq ft | Includes tear-off, underlayment, standard flashings, and cleanup on an accessible single-story roof. |
| Slate or shake profile installation | Starting at $11/sq ft | Steeper pitches, complex valleys, and historic color matching push the rate above the base figure. |
| Retrofit over existing shingles | Starting at $8/sq ft | Available when existing layers are within code limits and the deck checks out structurally. |
| Deck repair or re-sheathing | On estimate | Soft sheathing, skip sheathing, or rot found after tear-off needs an on-site look before pricing. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel shake or slate profile | Starting at $9/sq ft | Includes tear-off, underlayment, ice-and-water shield, and standard flashing on a simple gable roof. |
| Stone-coated steel tile profile | Starting at $11/sq ft | Heavier profile with stronger wind uplift rating, priced higher due to material cost and panel weight. |
| Retrofit over one shingle layer | Starting at $7/sq ft | Saves tear-off and disposal cost when decking is sound and local code allows a second layer. |
| Complex roof with valleys and dormers | On estimate | Steep pitch, multiple valleys, chimneys, and skylights need an on-site look before pricing. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay window roof | Starting at $20/sq ft | Includes soldered copper pans, underlayment, and edge metal; complexity and access move the price. |
| Zinc or aluminum accent roof | Starting at $22/sq ft | Covers dormers, cupolas, and small architectural details; roof height and detail count affect cost. |
| Full architectural copper or zinc roof | On estimate | Requires an on-site look at roof geometry, deck condition, flashing, and historic review requirements. |
| Custom flashing and trim fabrication | On estimate | Priced per penetration and valley; chimney and skylight count drives the total. |
| Travel | Included | in Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard coating (wash, rust treatment, two coats) | Starting at $2.50/sq ft | Includes pressure wash, spot rust treatment, and two-coat system on accessible roofs. |
| Heavy rust and re-fastening | From $3.50/sq ft | Adds rust converter, screw replacement, and washer resealing on exposed fastener panels. |
| Barn, agricultural, and commercial roofs | On estimate | Large square footage and staging needs require an on-site look before pricing. |
| Travel | Included | in Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney re-flash | Starting at $600 | Includes removal of old flashing and in-house bent step and counterflashing for one chimney. |
| Skylight curb re-flash | Starting at $750 | Includes curb flashing rebuild and re-set; price rises with height and unit size. |
| Chimney cricket fabrication | Starting at $900 | Includes custom bent cricket and new flashing; wider chimneys and steep pitches cost more. |
| Valley or dormer flashing | Starting at $850 | Includes valley metal or dormer step flashing replacement; complex rooflines add labor. |
| Multiple penetrations or rotted decking | On estimate | Needs an on-site look to price access, deck repair, and panel work together. |
| Estimate | Free | Response within 24 hours at (567) 702-4617, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard eave guard run | Starting at $1,200 | Covers a normal single-story eave run with standard access and pad-style guards. |
| Bar-style snow rail system | Starting at $1,800 | Continuous rails clamped to seams on steeper roofs with longer eave runs. |
| Heat cable at eave and valley | Starting at $1,500 | Self-regulating cable in eave, valley, and downspout to keep meltwater moving. |
| Combined guard and cable system | On estimate | Needs an on-site look to size the guard rows and cable runs together. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, and gutter inspection with photos and a written repair versus replacement recommendation |
| Minor repair (screws, seams, small panel) | Starting at $250 | Covers fastener replacement, seam resealing, and small panel work, with access and panel count driving the final number |
| Panel and flashing repair | Starting at $650 | Includes panel replacement and flashing rebuild at chimneys or skylights, priced by damaged area and roof pitch |
| Emergency tarping and temporary sealing | Starting at $300 | Same-day temporary protection after a storm, with urgency and roof access affecting the rate |
| Large or widespread storm damage | On estimate | Widespread hail or wind damage needs an on-site walk and photo documentation before a scope is set |
| Estimate | Free | Response within 24 hours at (567) 702-4617, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof inspection | Free estimate | On-roof check of panels, seams, fasteners, and flashing with photo record and written summary. |
| Pre-purchase inspection | Starting at $349 | Full condition report with remaining service life estimate, attic check, and documented repair costs. |
| Leak trace and moisture inspection | Starting at $275 | Targeted leak investigation with attic access, moisture readings, and penetration checks, priced by roof complexity. |
| Storm and insurance documentation | On estimate | Hail and wind damage documented with photos and measurements for your claim file; scope determines the price. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter install | Starting at $9/linear ft | Includes on-site forming, heavy-duty hangers, and standard downspout layout for single-story runs. |
| Half-round steel with oversized downspouts | Starting at $16/linear ft | Deeper profile and 3x4 outlets for steep roofs and fast spring thaw volume. |
| Leaf guard system | Starting at $6/linear ft | Stainless micro-mesh sized for maple seeds and oak debris, priced by run length. |
| Commercial or agricultural box gutter | On estimate | Barn and grain bin runs need an on-site look at panel profile, span, and discharge. |
| Travel | Included | In Toledo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (567) 702-4617, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or pole building re-roof | Free estimate | Includes panel and trim takeoff, fastener spec, and deck inspection before any number is quoted. |
| Light commercial roof repair | Starting at $450 | Covers leak diagnosis, fastener and sealant repair, and flashing work on accessible low-slope roofs. |
| Full commercial or agricultural replacement | On estimate | Square footage, pitch, deck condition, insulation spec, and tear-off versus recover all shift the final price. |
| Travel | Included | In Toledo and surrounding northwest Ohio counties, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (567) 702-4617, with no obligation to book the job. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Toledo usually want the same thing: a straight answer about whether their roof can be repaired or really needs to be replaced. Toledo Metal Roofing is a local contractor network built around that honesty. We handle metal roof installation, replacement, full re-roofs, and repairs on homes across the region, from steep Victorian pitches in the Old West End to brick ranches in West Toledo and newer two-story homes in Sylvania. Our crews understand the conditions here: heavy tree cover along the Maumee, lake-influenced snow and freeze-thaw cycles, strong wind off Lake Erie, and a large stock of aging screw-down roofs whose fasteners are due for service.
We serve Toledo, Sylvania, Maumee, Oregon, Holland, and the surrounding communities. Whether you need a small metal roof repair or a full system evaluation, our network of licensed, insured local contractors will tell you plainly what the roof needs and what it does not.
Most metal roof leaks in Toledo trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that seal fails, water works in around the screw. Seams can separate as panels expand and contract with temperature swings. Pipe boots, chimney flashing, skylight curbs, and valley details fail as sealant ages out. Wind off the lake can lift and peel panel edges, and fallen limbs from the oaks and maples overhead can puncture panels outright.
Ignoring a small leak is expensive. Water often tracks along purlins and decking far from the point of entry, so by the time a stain shows up on your ceiling, sheathing may already be rotting and insulation may be saturated. That is why we start with a proper metal roof leak repair assessment rather than a tube of sealant and a hope.
The honest call between repair and replacement depends on the system, its age, and the condition of the deck. Often, a full screw replacement and re-fastening with new sealing washers restores a watertight roof for a fraction of replacement cost. When the panels themselves are sound, that is the right answer, and we will say so. Call (567) 702-4617 to schedule an inspection or request a free estimate.
We install the full range of metal systems and match the roof to the home rather than pushing one product. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium profile with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, workshops, and outbuildings. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
Here is the honest comparison: standing seam costs more upfront but has no exposed fasteners to service, while screw-down panels cost less and need their fasteners checked and replaced over the roof's life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound; when it is not, a tear-off is the right call.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. Your price depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. We frame every figure as a typical range because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can give you real numbers for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, the rules are informational only: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and historic district or HOA design review can affect panel profile and color choices. Requirements vary, so always verify with the Toledo building or planning department before starting your project. Contact us with questions.
Ready to get started? Toledo Metal Roofing serves in Toledo and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Toledo · Response within 24h · No commitment · ☎ (567) 702-4617
Your Free Quote Request